
1-1/2 x 1-1/2 in Precut Heavy Wall Heat Shrink, Choose a Color
ArrivesTue, Nov 24 - Wed, Nov 25

ArrivesTue, Nov 24 - Wed, Nov 25

ArrivesTue, Nov 24 - Wed, Nov 25

ArrivesTue, Nov 24 - Wed, Nov 25

ArrivesTue, Nov 24 - Wed, Nov 25
ArrivesTue, Nov 24 - Wed, Nov 25
Item Number: HS-HD-100x150
Tue, Nov 24 - Wed, Nov 25
Order within 9h 41m
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov






HS-HD-100x150
EACH
Precut
Heavy Wall
1"
0.01 lb
1" Heavy Wall Heat Shrink
Adhesive Lined
Crosslinked Polyolefin Heat Shrink
Cut piece 1 1/2" Length
Features:
Applications:
Approvals and Compliance:

-55°C to 110°C

Select a size which will shrink snugly over the component to be covered. Match your component diameter with the
Recovered Inside Diameter (d) for the best fit. Restricted recovery will result in lower wall thickness.
| PART NUMBER | EXPANDED INSIDE DIAMETER (D) | RECOVERED INSIDE DIAMETER (d) | RECOVERED WALL THICKNESS (w) | ||||
|---|---|---|---|---|---|---|---|
| CUT | INCHES | MM | INCHES | MM | INCHES | MM | |
| CFW-0350-BK | 0.35 | 9.0 | 0.12 | 3.0 | 0.08 | 2.0 | |
| CFW-0500-BK | 0.51 | 13.0 | 0.16 | 4.0 | 0.09 | 2.4 | |
| CFW-0750-BK | HSBLKHD | 0.75 | 19.0 | 0.20 | 5.0 | 0.10 | 2.5 |
| CFW-1100-BK | HDBLKHD-1 | 1.30 | 33.0 | 0.31 | 8.0 | 0.13 | 3.2 |
| CFW-1500-BK | 1.57 | 40.0 | 0.47 | 12.0 | 0.16 | 4.0 | |
| CFW-2000-BK | HSBLKHD-2 | 2.17 | 55.0 | 0.63 | 16.0 | 0.16 | 4.0 |
| CFW-2700-BK | 2.95 | 75.0 | 0.87 | 22.0 | 0.16 | 4.0 | |
| CFW-3500-BK | 3.74 | 95.0 | 1.18 | 30.0 | 0.17 | 4.2 | |
| CFW-4700-BK | 4.53 | 115.0 | 1.34 | 34.0 | 0.17 | 4.2 | |
| PROPERTY | TYPICAL VALUE |
|---|---|
| Shrink Ratio | >3 to 1 |
| Operating Temperature | -55°C ~ 125°C |
| Tensile Strength | 14.5 MPa |
| Ultimate Elongation | ≥450% |
| Tensile Strength After Aging | 13.5 MPa |
| Ultimate Elongation After Aging | 400% |
| Concentricity | 70 |
| Longitudinal Shrinkage | 5 |
| Dielectric Strength | ≥21kV/mm |
| Cracking Resistance | No Cracking |
| ADHESIVE | |
| Water Absorbtivity | 0.15% |
| Softening Point | 85°C |
| Peel Strength | 8N/25mm |
| Copper Stability | Pass |
| Antibacterial Property | Pass |